00.00
This update can also be done via OTA.
TA + USB_MADRID_BARCELONA_v0071.0410_20Nov15 RS8100HD_ENGEL_TIKS_actualizacion_por_O
RS8100HD
November 20, 2015
#############################################
UPDATE: PARTY TO SEE MADRID - BARCELONA 2015
Update air (OTA) version 0403-0410.
1. Press MENU
2. Go to Tools
3. Select "UPDATE FOR RED"
4. Press "Start" option at the bottom.
5. Select "Yes" to accept the update.
IMPORTANT: Do not turn on / handle receiver during the update process !!!
or DOWNLOAD
RS8100HD
Nov 19 2015
Do NORMAL upgrade from a previous patch. If SW is original the do FULL UPGRADE.
IMPROVED VERSION !!!
v0071.0410
- BeinSports HD 1, 2 & 3 and BeinMAX 4,5,6,7,8,9 & 10 (Astra 19º).
- Support for C+PARTIDAZO HD & SD.
- Support for MOVISTAR F1 + MOTOGP channels (Astra 19º).
- Support for Canal+France
- Support for porn channels, Red Light and Hustler (Hotbird).
- Support for TAQUILLAS and TAQUILLA X (weekends).
- Support for TIVUSAT channels (Hotbird).
- Support for SRG_SSR (Hotbird).
- Support for HD+ (Astra 19º)
FAVOURITES LISTS
FAV1 --> C+HD
FAV2 --> C+SD
FAV3 --> TDT
FAV4 --> MOVISTAR+SPORTS
FAV5 --> FRANCE
FAV6 --> X
FAV7 --> TIVU
FAV8 --> SRG-SSR
FAV9 --> HD+
Use good quality FLASH disk with best read/write performace to avoid damage STB, formatted at FAT32 file system and totally erased device. Copy the ".abs" file on to the root (/).
IMPORTANT: Disconnect STB from INTERNET and SAT signal during upgrade.
TIKS is already ENABLED by default, so if you are comming from a OFFICIAL SW but you have problems with it press MENU --> CONFIGURATION --> INFORMATION --> and press "7777" to enable the hidden menu. TIKS has to be ENABLED only. You have to configure your network by WIFI dongle or Ethernet cable, (if USB WIFI dongle is connected but not in use because you want to use Ethernet cable you have to DISABLE WIFI it first).
UPGRADE PROCESS:
1.- Extract ".abs" file into root folder (/) using a Flash disk device.
2.- Insert USB disk on "USB" port slot.
3.- Go to TOOLS option inside menu, then select UPGRADE BY USB option. Select USB drive.
4.- Select "FW" update file (*.abs), press RED button (upgrade), and select "Full Upgrade". Wait until SW will be upgraded!!!
5.- Wait until RS8100HD reboots, dont touch any remote commander key.
COMMON OPTIONS:
MENU --> CONFIGURATION --> INFORMATION --> press "7777" (TIKS, NewCamd Client, NewCamd Server, CCCAM).
INFO:
There are the following upgrade/backup methods:
Full Upgrade --> "ALL FLASH" mode, maincode (firmware) + user data base.
Normal Upgrade --> Only maincode update (firmware), existing user data base will be preserved.
Userdb --> Update only the user data base contained on that .abs file.
Backup (GREEN button) --> To make a backup of your existing maincode + user data (AllCode).
Tidak ada komentar
Posting Komentar